Bi-fold Shower Screen Seal 8mm Glass Up to 40mm Gap D08

This seal is suitable if:

• Your shower glass is 8mm thick.
• The gap you need to seal is approximately 10mm to 40mm.
• You need to seal a larger gap between two glass panels.
• The gap is on a folding shower door, angled glass joint, corner section or similar glass-to-glass position.
• The panels may move as part of the door system, but the sealed gap itself is not the entry opening where the two panels need to pull apart.
• You want a water-blocking seal with firm glass channels and a flexible centre section.
• Your required length is 2000mm or less.

Choose another seal if:

• Your glass is not 8mm thick.
• The two glass panels need to separate from this exact gap to open the shower door for entry and exit.
• You are sealing the main opening edge of the shower door.
• Your gap is smaller than 10mm or larger than 40mm.
• You need a magnetic closing seal.
• You need a bottom seal, drip seal, guide rail seal or track seal.
• Your glass edge has a metal frame, thick trim or profile that prevents the seal from pushing onto the glass.

Browse our full folding shower screen seals range to compare glass thickness, gap size and seal shape before ordering.