Bi-fold Shower Screen Seal 10mm Glass Up to 40mm Gap D010

This seal is suitable if:

• Your shower glass is 10mm thick.
• The gap between the two glass panels is approximately 10mm to 40mm.
• You need to seal a wider gap on a frameless shower enclosure or heavier glass shower screen.
• The seal will be fitted between two glass edges, with one U-channel gripping each side.
• You are sealing a folding door centre section, angled glass joint, corner gap or similar glass-to-glass gap.
• The glass panels may fold, turn or move within the shower system, but this sealed gap is not the doorway edge that needs to pull apart for access.
• You want a seal with a firmer hold on thicker glass and flexible fins to improve water resistance.
• Your required length is 2000mm or less.

Choose another seal if:

• Your glass is 6mm or 8mm thick.
• The two glass panels need to separate from this exact gap when entering or leaving the shower.
• You are sealing the main opening edge where the door needs to pull open.
• Your gap is below 10mm or above 40mm.
• You need a magnetic closing seal, bottom sweep seal, drip seal, rail seal or guide seal.
• Your glass has a metal frame, bulky trim or edge profile that prevents the U-channel from pushing directly onto the glass.

Browse our full folding shower screen seals to compare the correct glass thickness before ordering.