Magnetic Shower Door Seal Pair – 10mm T-Slot, 16mm Gap MG001
Framed Shower Door Magnetic Strip | 7mm T-Slot | 1 Pair (2000mm) MG002
Ultra-Deep 9mm T-Slot Framed Shower Door Magnetic Strip (13mm Depth) MG003
Specialist Shower Frame Channel Seal 7mm Width VL005
3mm T-Bar 8mm Bubble Compression Shower Frame Gasket VD001
Vertical Bulb Trim Seal | Black 5mm T-Bar x 13mm Bulb Seal VU007
11mm Frame Folding Bath Screen Seal ROT08
13mm Wide-Track Framed Folding Screen Seal ROT07
Reinforced Bulb Seal Strip - Impact Resistant Vinyl BU005
6mm T-Bar 6mm Gap Precise Fit Shower Frame Gasket VD004 (V-Wing Buffer)
6mm T-Post Professional Shower Door Bulb Seal - Clear Vinyl BU002
7mm T-Bar 10mm Bubble Compression Shower Frame Gasket VD002 (Wide-Track Standard)
Bi-fold Shower Screen Seal DOU02
Rubber Seal For Vertical Folding Shower Screen DOU03
Fold Shower Screen Seal 8mm Channel 12mm Fin ROT03
Folding Bath Screen Seal Replacement 7mm Channel ROT05
2-Panel Folding Bath Screen Flipper Seal 24mm Width ROT06
Bi-fold Shower Door Seal Replacement DOU01
Black Folding Shower Door Seal 9mm Fin ROT04
Bi-fold Shower Door Seal 6mm Glass Up to 40mm Gap D06
Bi-fold Shower Screen Seal 8mm Glass Up to 40mm Gap D08
Bi-fold Shower Screen Seal 10mm Glass Up to 40mm Gap D010
4mm Radius 29mm Fin Folding Shower Screen Bottom Seal VF002 (Long-Reach)
5mm Cylinder Top 21mm Fin Folding Shower Screen Seal VF004
Not sure which framed shower door seal fits?
If your shower door is old, has no model number, or the original seal is no longer available, send us photos before ordering.
We’ll check the seal profile, glass thickness and fitting position to help you find the closest suitable replacement.
Choosing a Framed and Bi-fold Shower Door Seal Strip
Framed and bi-fold shower doors can use several different seal styles. Before ordering, check where your old seal fits: inside a metal frame channel, along the bottom edge, on a folding panel, or against another closing edge.
Swipe left to view more →
| Where the Old Seal Fits | Likely Seal Type | What to Check Before Ordering |
|---|---|---|
| Inside a metal frame channel | Frame channel seal or T-slot strip | Measure the channel width and compare the old profile shape carefully. |
| Along the bottom of the door | Bottom sweep or framed door bottom seal | Measure the gap between the door and tray or bath rim. |
| On a folding or bi-fold screen | Bi-fold shower door seal or folding bath screen seal | Check whether the seal needs to flex when the panels fold. |
| Between two closing edges | Magnetic strip or closing seal | Check the door angle, magnet direction and whether the old strip is a pair. |
| Against a wall, frame or fixed panel | Vertical side seal or bulb seal | Measure the side gap and check whether the seal clips into the frame or pushes onto glass. |
Tip: Do not choose by length alone. For framed shower door seal strips, the profile shape and channel width are usually more important than the overall strip length.
























