90° Magnetic Shower Door Seal Pair for 8-10mm Glass MD81090
100% Guaranteed Safe Checkout, Selected profiles may include 2–3 close-fit options at no extra charge.
Couldn't load pickup availability
Description
Description
Key specifications
Check Before You Buy
This seal is suitable if:
- Your glass is 8mm, 9mm or 10mm thick.
- You need a 90° glass-to-glass side closing edge
- The vertical gap between the two glass panels is approximately 11mm when the door is closed.
- You need a 2000mm seal that can be trimmed to size.
Choose another seal if:
- Your glass is not 8mm, 9mm or 10mm thick.
- You need a 180° magnetic seal for two glass doors closing in a straight line.
- Your shower door is curved.
- You need a bottom seal, side seal, or a non-magnetic shower seal.
Browse our full magnetic shower seal to compare all sizes.
Suitable Applications & Installation
The MD81090 magnetic shower door seal pair is designed for 8mm, 9mm and 10mm glass where two straight glass panels meet at a 90-degree angle.
It can be used on suitable sliding shower doors or hinged shower doors, provided the closing position and gap match the product images. When the door is closed, the two glass panels should meet at 90°, with an approximate 11mm vertical gap between them. This allows the two magnetic strips to line up and close securely.
This seal is a suitable replacement for old 90-degree magnetic shower door seals that have become worn, stiff, weak or discoloured over time. The clear PVC body gives a clean finish, while the magnetic inserts help hold the shower door closed and reduce water escaping through the vertical gap.
It is not suitable for 180° glass-to-glass closures, curved glass doors, doors with a much smaller or larger gap, or any shower door where the magnets cannot align properly.
To install, remove the old magnetic seals and clean the glass edges. Check the glass thickness, closing angle and gap size before fitting. Push each seal onto the glass from top to bottom, making sure the magnetic strips face each other correctly. The 2000mm length can be carefully trimmed to the required size before installation.
Delivery & Shipping Information
Delivery & Shipping Information
We aim to dispatch all orders placed before 2 PM on the same day. Orders placed after 2 PM usually ship the next working day.
Important: Our automated system selects the best courier based on your address, order size, and quantity.
Delivery Summary
- UK Mainland Standard: 2–3 working days (FREE).
- Highlands, Islands & NI: 3–7 working days (Calculated at checkout).
A small surcharge applies to remote areas (Highlands/Islands/NI). This is clearly calculated when you enter your postcode.
If your order hasn't arrived within 5 working days (any service), please email us immediately at info@showerdoorseal.uk.
Compliance Information
Compliance Information
Product Safety
Manufacturer Name: SIMBA International Limited
Address:No.25-2, Fuke North Road,
Luosong Village, Fusha Town,
Zhongshan, Guang Dong, China
Contact: support@glassseals.com
Notified by email when this product becomes available
£29.88
A Better Chance of Getting the Right Fit
For selected profiles, your order may include 2–3 closely matched finished seals, packed together at no extra charge. Small measurement differences can be difficult to confirm at home, so we include nearby options where this helps reduce the risk of ordering the wrong fit. Each seal is complete and ready to fit. Simply use the one that suits your shower door best.
Not sure which seal you need?
Send us a photo of your shower door edge and gap — we’ll help you find the right fit.
About SIMBA Seals UK
SIMBA Seals UK specialises in replacement shower door seals, supported by a glass seal manufacturing team working with seal profiles since 1998.
We help customers match seals by glass thickness, gap, profile and door design, with access to over 9,000 profiles for older or harder-to-match enclosures.