90° Magnetic Shower Door Seal Pair for 8-10mm Glass ME81090

The ME81090 magnetic shower door seal is designed for 8mm, 9mm and 10mm glass where two glass panels meet at a 90-degree angle.

This seal can be used on suitable sliding shower doors or hinged shower doors, provided the glass closing position matches the product images. One glass panel should meet the other glass panel in a straight 90° closing arrangement, allowing the magnetic seals to line up correctly when the door is closed.

It is a suitable replacement for old 90-degree magnetic seals that have become worn, stiff, weak or discoloured over time. The clear PVC body gives a clean look, while the magnetic insert helps the shower door close more securely and reduce water escaping through the vertical gap.

This seal is not suitable for 180° glass-to-glass closures, curved shower doors, frameless layouts where the glass does not meet at 90°, or sliding doors with a different closing structure.

To install, remove the old seal and clean the glass edge. Check that the glass thickness and closing angle match before fitting. Push the seal onto the glass from top to bottom, then trim the 2000mm length carefully if required.