Flexible T-Slot Framed Shower Door Seal – 4mm Head, 8mm Thick Fin VH010
100% Guaranteed Safe Checkout
Couldn't load pickup availability
Description
Description
Key Specifications
Check Before You Buy
This seal is suitable if:
- Your framed shower door uses a T-slot channel.
- The channel can securely retain an approximately 4mm T-head.
- You only need around 8mm of sealing reach.
- You need a strip up to 2000mm long.
Choose another seal if:
- Your installation channel requires a wider T-head.
- The gap is larger than the 8mm fin can reach.
- You need a longer fin for a wider opening.
- The old seal clips directly onto the glass.
Suitable Applications
VH010 is the compact option within this range of flexible T-slot seals for framed shower doors.
Its approximately 4mm T-head slides into the existing aluminium channel, while the short 8mm fin helps close a smaller gap without adding unnecessary material around the moving edge of the door.
The low-profile design is particularly useful where a longer fin would be compressed too heavily, drag against the frame or make the door more difficult to open and close.
Made entirely from clear flexible PVC, VH010 is easy to cut and can follow minor variations in an older frame. It is supplied in a 2000mm length and can be trimmed to suit the door.
Measure the aluminium channel and the actual gap before ordering. This profile is selected by the T-slot dimensions and fin reach, not by glass thickness.
Delivery & Shipping Information
Delivery & Shipping Information
We aim to dispatch all orders placed before 2 PM on the same day. Orders placed after 2 PM usually ship the next working day.
Important: Our automated system selects the best courier based on your address, order size, and quantity.
Delivery Summary
- UK Mainland Standard: 2–3 working days (FREE).
- Highlands, Islands & NI: 3–7 working days (Calculated at checkout).
A small surcharge applies to remote areas (Highlands/Islands/NI). This is clearly calculated when you enter your postcode.
If your order hasn't arrived within 5 working days (any service), please email us immediately at info@showerdoorseal.uk.
Compliance Information
Compliance Information
Product Safety
Manufacturer Name: SIMBA International Limited
Address:No.25-2, Fuke North Road,
Luosong Village, Fusha Town,
Zhongshan, Guang Dong, China
Contact: support@glassseals.com
Notified by email when this product becomes available
Care & Installation Tips
Ensure a better fit and longer-lasting clarity.
✓ DO’S
- Direct Press: Fit by pressing directly onto the glass edge to protect the surface.
- Deep Clean: Remove all UK hard-water limescale before installation.
- Sharp Tools: Use garden pruners for a clean, professional finish.
- Daily Rinse: Simply wash away soap suds after your shower.
✕ DON’TS
- No Sliding: Never slide the seal along the glass; this risks scratching.
- No Extreme Heat: Avoid water >70°C or hair dryers to prevent warping.
- No Soapy Water: Do not use lubricants—they accelerate mould growth.
- No Harsh Chemicals: Avoid bleach or acidic cleaners on the seal.
Not sure which seal you need?
Send us a photo of your shower door edge and gap — we’ll help you find the right fit.
About SIMBA Seals UK
SIMBA Seals UK is a specialist UK shower door seal replacement brand, backed by a glass seal manufacturing team focused on seal profiles since 1998.
Through showerdoorseal.uk, we help customers find the right replacement seal by checking the glass thickness, gap size, seal profile, frame channel and shower door design.
Our range covers common bottom, side, magnetic and framed shower door seals. For older or harder-to-match enclosures, our wider catalogue includes over 9,000 glass seal profiles, giving customers more options when a standard seal is difficult to identify.
- Choosing a selection results in a full page refresh.