4-6mm Glass 180° Magnetic Shower Door Seal 5–8mm Gap ME456180
100% Guaranteed Safe Checkout, Selected profiles may include 2–3 close-fit options at no extra charge.
Couldn't load pickup availability
Description
Description
Product Specifications
Please Check Before Buying
This seal is suitable if:
- Your glass is 4mm, 5mm or 6mm thick.
- Two straight glass doors meet in a 180° glass-to-glass closure.
- The closed gap is approximately 5–8mm.
- You need a matching pair of vertical magnetic seals.
- Your existing seals push directly onto the glass.
- Your required finished length is 2000mm or less.
Please choose a different seal if:
- Your glass is thicker than 6mm.
- Your doors meet at an angle rather than in a straight line.
- The gap is much smaller than 5mm or larger than approximately 8mm.
- Your enclosure has sliding doors.
- You need a bottom seal, drip seal or non-magnetic side seal.
Suitable Applications & Installation
ME456180 is a magnetic closing seal pair designed for 4–6mm straight shower glass.
It is intended for two glass doors that meet face-to-face in a straight 180° position. The profile works best where the closing gap is approximately 5–8mm, giving it a little more working range than versions designed for thicker glass and narrower gaps.
The gap does not need to measure exactly 8mm. A smaller gap within the stated range may still be suitable, provided the glass thickness and 180° closing arrangement also match.
The replacement seal does not need to copy every external measurement of the old profile. The main checks are the glass thickness, the way the two magnetic edges meet and the working gap.
The pair has no fixed left- or right-hand fitting direction, so either strip can normally be fitted to either door edge.
Each strip is supplied in a 2000mm length and can be trimmed before installation. Remove the old seals, clean and dry the glass edges, then press the new profiles on evenly from top to bottom.
Once fitted, close the doors slowly and check that the magnetic strips align and attract along the full height.
ME456180 is suitable for replacing seals that have become yellowed, brittle, loose or weaker over time. When the fitting measurements are correct, the new pair can help restore the closing action and reduce water passing through the centre joint.
Delivery & Shipping Information
Delivery & Shipping Information
We aim to dispatch all orders placed before 2 PM on the same day. Orders placed after 2 PM usually ship the next working day.
Important: Our automated system selects the best courier based on your address, order size, and quantity.
Delivery Summary
- UK Mainland Standard: 2–3 working days (FREE).
- Highlands, Islands & NI: 3–7 working days (Calculated at checkout).
A small surcharge applies to remote areas (Highlands/Islands/NI). This is clearly calculated when you enter your postcode.
If your order hasn't arrived within 5 working days (any service), please email us immediately at info@showerdoorseal.uk.
Compliance Information
Compliance Information
Product Safety
Manufacturer Name: SIMBA International Limited
Address:No.25-2, Fuke North Road,
Luosong Village, Fusha Town,
Zhongshan, Guang Dong, China
Contact: support@glassseals.com
Notified by email when this product becomes available
£29.88
A Better Chance of Getting the Right Fit
For selected profiles, your order may include 2–3 closely matched finished seals, packed together at no extra charge. Small measurement differences can be difficult to confirm at home, so we include nearby options where this helps reduce the risk of ordering the wrong fit. Each seal is complete and ready to fit. Simply use the one that suits your shower door best.
Not sure which seal you need?
Send us a photo of your shower door edge and gap — we’ll help you find the right fit.
About SIMBA Seals UK
SIMBA Seals UK specialises in replacement shower door seals, supported by a glass seal manufacturing team working with seal profiles since 1998.
We help customers match seals by glass thickness, gap, profile and door design, with access to over 9,000 profiles for older or harder-to-match enclosures.