Vertical Framed Folding Shower Door Seal DOU02
100% Guaranteed Safe Checkout, Selected profiles may include 2–3 close-fit options at no extra charge.
Couldn't load pickup availability
Description
Description
Key Specifications
Check Before You Buy
Currently being restocked — estimated dispatch is around 15 October.
This seal is suitable if:
- You have a framed folding shower door.
- The seal is needed at the vertical centre joint between two moving door panels.
- The channel width on each side is approximately 8.5mm.
- The distance between the two marked measuring points is approximately 14.5mm.
- The opening of each frame slot is wider than 3.5mm.
- You need a strip up to 2000mm long.
Choose another seal if:
- Your shower door is frameless.
- You need a bottom seal or horizontal seal.
- Your old profile does not fit into two framed channels.
- The opening of the frame slot is 3.5mm or narrower.
- The key measurements do not match your existing seal.
The 14.5mm measurement is not the full width of the seal. Measure only between the points shown in the product dimensions image.
Suitable Applications
The DOU02 is a vertical seal for framed folding shower doors. It is designed to fit between two framed door panels that fold and move together.
The seal has two rigid PVC channels connected by a flexible PVC centre section. The rigid channels fit into the existing frame grooves, while the flexible centre allows the panels to move through approximately 0°–180° as the door opens and folds.
Before ordering, compare the profile of your old seal with the product images. The three measurements that matter most are:
- Approx. 14.5mm between the marked points
- Approx. 8.5mm across each side channel
- A frame slot opening wider than 3.5mm
The seal is supplied in a 2000mm length and can be cut shorter to match the height of the door.
DOU02 must be installed vertically. It is not suitable for frameless glass, shower door bottoms, horizontal use or magnetic closing edges.
Delivery & Shipping Information
Delivery & Shipping Information
We aim to dispatch all orders placed before 2 PM on the same day. Orders placed after 2 PM usually ship the next working day.
Important: Our automated system selects the best courier based on your address, order size, and quantity.
Delivery Summary
- UK Mainland Standard: 2–3 working days (FREE).
- Highlands, Islands & NI: 3–7 working days (Calculated at checkout).
A small surcharge applies to remote areas (Highlands/Islands/NI). This is clearly calculated when you enter your postcode.
If your order hasn't arrived within 5 working days (any service), please email us immediately at info@showerdoorseal.uk.
Compliance Information
Compliance Information
Product Safety
Manufacturer Name: SIMBA International Limited
Address:No.25-2, Fuke North Road,
Luosong Village, Fusha Town,
Zhongshan, Guang Dong, China
Contact: support@glassseals.com
Notified by email when this product becomes available
£29.99
A Better Chance of Getting the Right Fit
For selected profiles, your order may include 2–3 closely matched finished seals, packed together at no extra charge. Small measurement differences can be difficult to confirm at home, so we include nearby options where this helps reduce the risk of ordering the wrong fit. Each seal is complete and ready to fit. Simply use the one that suits your shower door best.
Not sure which seal you need?
Send us a photo of your shower door edge and gap — we’ll help you find the right fit.
About SIMBA Seals UK
SIMBA Seals UK specialises in replacement shower door seals, supported by a glass seal manufacturing team working with seal profiles since 1998.
We help customers match seals by glass thickness, gap, profile and door design, with access to over 9,000 profiles for older or harder-to-match enclosures.