F Shape Vertical Shower Door Seal for 8-10mm Glass 12mm Fin F810S12

This seal is suitable if:

• Your glass is 8mm, 9mm or 10mm thick.
• You have a frameless sliding shower door with two overlapping glass panels.
• The measured gap between the two overlapping panels is approximately 15mm–21mm when fitting both strips as a pair.
• You need a mid-size 12mm fin where an 8mm fin is too short but a longer fin may not be required.
• You want to help reduce water escaping through the side overlap where the sliding panels pass each other.
• Your required length is 2000mm or less.
• You are replacing old, yellowed, cracked or loose F-Type sliding door overlap seals.

Choose another seal if:

• Your glass is thinner than 8mm or thicker than 10mm.
• The gap between the glass panels is smaller than 15mm or larger than 21mm when fitting as a pair.
• You only want to fit one strip for a 15mm–21mm gap.
• You need a shorter fin for a tighter overlap gap.
• You need a longer fin for a wider overlap gap.
• You need a magnetic closing seal.
• You are looking for a bottom shower door seal, drip seal, threshold seal, guide rail seal or track seal.
• Your shower door is hinged, framed, or has a thick metal edge trim.

Browse our full F-Type shower door seals range to compare different fin sizes.