F Shape Vertical Shower Door Seal for 8-10mm Glass 8mm Fin F810S8
100% Guaranteed Safe Checkout
Couldn't load pickup availability
Description
Description
Product Video
Key specifications
Check Before You Buy
This seal is suitable if:
- Your glass is 8mm, 9mm or 10mm thick.
- You have a sliding shower door with two overlapping glass panels.
- The measured gap between the two overlapping panels is approximately 11mm–14mm.
- You plan to fit both strips as a pair for proper overlap sealing.
- You need a shorter 8mm fin for a narrow sliding door overlap.
- You want to help reduce water escaping from the side overlap of the sliding door.
- Your required length is 2000mm or less.
Choose another seal if:
- You only want to fit one strip and your gap is 8mm or larger.
- Your glass is thinner than 8mm or thicker than 10mm.
- The gap between the glass panels is less than 11mm or more than 14mm when fitting as a pair.
- You need a longer fin for a wider overlap gap.
- You need a magnetic closing seal.
- You are looking for a bottom shower door seal, drip seal, threshold seal, guide rail seal or track seal.
- Your shower door is hinged, framed, or has a thick metal edge trim.
Browse our full F-Type shower door seals range to compare different fin sizes.
FAQ
1. What glass thickness does this seal fit?
It fits 8mm, 9mm and 10mm frameless glass.
2. What gap is this seal suitable for?
When fitted as a pair, this seal is suitable for overlap gaps of approximately 11mm–14mm between two sliding glass panels.
3. Can I use just one strip?
Single-strip use is not recommended for an 11mm–14mm gap. One strip is only suitable for gaps under 8mm.
4. Where should this seal be fitted?
It fits onto the overlapping edge of a sliding shower door, where the glass panels pass each other.
5. How do I cut this seal to size?
Use your old seal as a cutting guide, or hold the new seal against the shower door and mark the required length before cutting.
Suitable Applications
The F810S8 Standard 8mm Fin F-Type Shower Seal Pair is designed for frameless sliding shower doors with 8mm, 9mm or 10mm glass.
It is best suited to narrow overlap gaps where two sliding glass panels pass each other. When both strips are fitted as a pair, this seal suits measured overlap gaps of approximately 11mm–14mm.
The 8mm flexible fin is designed to work as part of a paired overlap seal setup. Single-strip use is not recommended for 11mm–14mm gaps; one strip should only be used for gaps under 8mm.
As this product is supplied as a pair, fitting both strips is recommended for better coverage along the sliding door overlap.
This seal is not intended for magnetic door closing edges, bottom shower door seals, drip seals, guide rail seals, framed metal edges, hinged doors, or glass thinner than 8mm or thicker than 10mm.
Delivery & Shipping Information
Delivery & Shipping Information
We aim to dispatch all orders placed before 2 PM on the same day. Orders placed after 2 PM usually ship the next working day.
Important: Our automated system selects the best courier based on your address, order size, and quantity.
Delivery Summary
- UK Mainland Standard: 2–3 working days (FREE).
- Highlands, Islands & NI: 3–7 working days (Calculated at checkout).
A small surcharge applies to remote areas (Highlands/Islands/NI). This is clearly calculated when you enter your postcode.
If your order hasn't arrived within 5 working days (any service), please email us immediately at info@showerdoorseal.uk.
Compliance Information
Compliance Information
Product Safety
Manufacturer Name: SIMBA International Limited
Address:No.25-2, Fuke North Road,
Luosong Village, Fusha Town,
Zhongshan, Guang Dong, China
Contact: support@glassseals.com
Notified by email when this product becomes available
Care & Installation Tips
Ensure a better fit and longer-lasting clarity.
✓ DO’S
- Direct Press: Fit by pressing directly onto the glass edge to protect the surface.
- Deep Clean: Remove all UK hard-water limescale before installation.
- Sharp Tools: Use garden pruners for a clean, professional finish.
- Daily Rinse: Simply wash away soap suds after your shower.
✕ DON’TS
- No Sliding: Never slide the seal along the glass; this risks scratching.
- No Extreme Heat: Avoid water >70°C or hair dryers to prevent warping.
- No Soapy Water: Do not use lubricants—they accelerate mould growth.
- No Harsh Chemicals: Avoid bleach or acidic cleaners on the seal.
Not sure which seal you need?
Send us a photo of your shower door edge and gap — we’ll help you find the right fit.
Certified Quality: ISO 9001 | ISO 14001 | REACH compliant
Quality & Environmental Standards
Simba® seals are manufactured to the highest international standards, ensuring safety and sustainability for your home.
ISO 9001:2015
Premium quality control ensuring consistent product durability and precision fit.
ISO 14001:2015
Manufactured with a commitment to environmental responsibility and eco-friendly processes.
SVHC / REACH
Certified non-toxic and safe for domestic use, free from harmful substances.
Have feedback on this seal? Tell us — we use customer input to improve future SIMBA designs.
- Choosing a selection results in a full page refresh.