180° Magnetic Shower Door Seal for Pivot & Hinged Shower Doors, 4-5mm Glass, 22mm Gap, M45A2M
100% Guaranteed Safe Checkout
Couldn't load pickup availability
Description
Description
Key Features
Check Before You Buy
Suitable if:
- Your shower door glass is 4mm or 5mm thick
- The gap between the two glass door edges is approx. 22mm when closed
- Your door closes in a 180° straight glass-to-glass position
- You need a pair of magnetic seals for two glass door edges
- Your shower door is a pivot or hinged shower door
- You want a no-glue push-fit replacement seal
Choose another seal if:
- Your glass is not 4mm or 5mm thick
- The gap between the glass edges is less than 22mm
- Your door does not close in a straight 180° position
- You have a sliding shower door
- You need a bottom shower door seal
- Your glass edge has a thick metal frame or unusual profile
For other 180° magnetic seals, see M68A2M for 6-8mm glass and M10A2M for 10mm glass.
FAQ
1. Is this sold as a pair?
Yes. This product includes 2 magnetic shower door seals, one for each glass door edge.
2. What glass thickness does M45A2M fit?
It fits 4mm and 5mm glass.
3. What does 22mm gap mean?
It refers to the recommended gap between the two glass door edges when the doors are closed. This seal is best suited for an approx. 22mm gap.
4. Can it be cut to size?
Yes. Each piece is 2000mm long and can be trimmed to match your shower door height.
5. Is it push-fit or a slide-on installation?
It is push-fit. The clear PVC grip presses directly onto the glass edge; it does not slide in from the end.
6. Is this suitable for sliding shower doors?
No. It is for straight 180° magnetic closing doors, not sliding shower doors.
Suitable Applications & Installation
M45A2M is suitable for 180° magnetic closing shower doors where two glass door edges meet in a straight line. It is commonly used on pivot, hinged, inward-opening and outward-opening shower doors where two glass edges close in a straight line.
The seal is easy to install with a clear soft PVC push-fit grip. Remove the old seal, clean and dry the glass edge, measure the required height, trim the seal to size, then press each piece onto the matching glass door edge. Make sure the black magnetic strips face each other so they can pull together when the doors close.
This product is for side magnetic sealing only. It is not suitable for sliding shower doors, bottom water seals, 90°/135° angled doors, heavily framed glass doors or non-standard glass profiles.
Delivery & Shipping Information
Delivery & Shipping Information
We aim to dispatch all orders placed before 2 PM on the same day. Orders placed after 2 PM usually ship the next working day.
Important: Our automated system selects the best courier based on your address, order size, and quantity.
Delivery Summary
- UK Mainland Standard: 2–3 working days (FREE).
- Highlands, Islands & NI: 3–7 working days (Calculated at checkout).
A small surcharge applies to remote areas (Highlands/Islands/NI). This is clearly calculated when you enter your postcode.
If your order hasn't arrived within 5 working days (any service), please email us immediately at info@showerdoorseal.uk.
Compliance Information
Compliance Information
Product Safety
Manufacturer Name: SIMBA International Limited
Address:No.25-2, Fuke North Road,
Luosong Village, Fusha Town,
Zhongshan, Guang Dong, China
Contact: support@glassseals.com
Notified by email when this product becomes available
Care & Installation Tips
Ensure a better fit and longer-lasting clarity.
✓ DO’S
- Direct Press: Fit by pressing directly onto the glass edge to protect the surface.
- Deep Clean: Remove all UK hard-water limescale before installation.
- Sharp Tools: Use garden pruners for a clean, professional finish.
- Daily Rinse: Simply wash away soap suds after your shower.
✕ DON’TS
- No Sliding: Never slide the seal along the glass; this risks scratching.
- No Extreme Heat: Avoid water >70°C or hair dryers to prevent warping.
- No Soapy Water: Do not use lubricants—they accelerate mould growth.
- No Harsh Chemicals: Avoid bleach or acidic cleaners on the seal.
Not sure which seal you need?
Send us a photo of your shower door edge and gap — we’ll help you find the right fit.
Certified Quality: ISO 9001 | ISO 14001 | REACH compliant
Quality & Environmental Standards
Simba® seals are manufactured to the highest international standards, ensuring safety and sustainability for your home.
ISO 9001:2015
Premium quality control ensuring consistent product durability and precision fit.
ISO 14001:2015
Manufactured with a commitment to environmental responsibility and eco-friendly processes.
SVHC / REACH
Certified non-toxic and safe for domestic use, free from harmful substances.
Have feedback on this seal? Tell us — we use customer input to improve future SIMBA designs.
- Choosing a selection results in a full page refresh.