Folding Bath Screen Seal Replacement 5mm Channel 14mm Fin ROT11
100% Guaranteed Safe Checkout, Selected profiles may include 2–3 close-fit options at no extra charge.
Couldn't load pickup availability
Description
Description
Key Specifications
Check Before You Buy
This seal is suitable if:
- Your folding or framed shower door has an existing side retaining channel.
- The track can accept an insert approximately 5.6mm wide.
- The channel opening is at least around 2.4mm.
- You need a projecting side profile of approximately 14.4mm.
- Your existing seal uses a rigid support section with a soft contact edge.
- Your required finished length is 2000mm or less.
Choose another seal if:
- Your track is too narrow for the 5.6mm insert.
- The slot opening is smaller than approximately 2.4mm.
- Your old seal clips directly onto exposed glass.
- You need a long flexible fin to bridge a large gap.
- You need a magnetic, bottom clip-on or T-slot seal.
Product Details
ROT11 is a track-insert side seal for folding and framed shower doors, designed to fit into an existing retaining channel rather than directly onto the glass.
The fixing section is approximately 5.6mm wide, with a narrow 2.4mm opening underneath. These are the first measurements to compare with your existing frame before ordering.
Unlike profiles that use a long soft fin, ROT11 has an approximately 14.4mm rigid side arm with a softer rounded contact edge at the end. This gives the profile support while allowing the contact point to remain less harsh against the adjoining door or frame section.
When replacing an old seal, do not rely on the overall appearance alone. Check the 5.6mm insert width and 2.4mm slot opening first, then confirm that the 14.4mm projection reaches the required contact point.
Supplied in a 2000mm length and can be trimmed before fitting.
Delivery & Shipping Information
Delivery & Shipping Information
We aim to dispatch all orders placed before 2 PM on the same day. Orders placed after 2 PM usually ship the next working day.
Important: Our automated system selects the best courier based on your address, order size, and quantity.
Delivery Summary
- UK Mainland Standard: 2–3 working days (FREE).
- Highlands, Islands & NI: 3–7 working days (Calculated at checkout).
A small surcharge applies to remote areas (Highlands/Islands/NI). This is clearly calculated when you enter your postcode.
If your order hasn't arrived within 5 working days (any service), please email us immediately at info@showerdoorseal.uk.
Compliance Information
Compliance Information
Product Safety
Manufacturer Name: SIMBA International Limited
Address:No.25-2, Fuke North Road,
Luosong Village, Fusha Town,
Zhongshan, Guang Dong, China
Contact: support@glassseals.com
Notified by email when this product becomes available
Why Some Orders Include More Than One Seal
For selected profiles, your order may include 2–3 closely matched finished seals, packed together at no extra charge. Small differences can be difficult to confirm at home, so we sometimes include a nearby option where this helps with fitting.
Each seal is complete and ready to fit. Simply use the one that suits your shower door best.
Not sure which seal you need?
Send us a photo of your shower door edge and gap — we’ll help you find the right fit.
About SIMBA Seals UK
SIMBA Seals UK specialises in replacement shower door seals, supported by a glass seal manufacturing team working with seal profiles since 1998.
We help customers match seals by glass thickness, gap, profile and door design, with access to over 9,000 profiles for older or harder-to-match enclosures.