4-6mm & 8mm Y-Shape Vertical Shower Door Seal 15mm Fin Y410
Bubble Shower Door Seal for 4–6mm Glass – 6mm Gap D456S7
Large Bubble Shower Door Seal for 4–10mm Glass Up to 11mm Gap D410S12
Bottom Bubble Shower Door Seal for 4–6mm Glass Up to 15mm Gap DA456S15
Bubble Shower Door Seal for 8mm Glass – 7mm Gap D08S7
Bulb Shower Door Seal for 10mm Glass Up to 7mm Gap D10S7
8mm Vertical Shower Seal for Sliding Door Buffer 2000mm RY3537
4–6mm H-Shape Vertical Shower Door Seal – 8mm Fin H456S8
4–6mm Glass H-Shape Vertical Shower Door Seal – 15mm Fin H456S15
4–6mm Glass H-Shape Vertical Shower Door Seal – 20mm Fin H456S20
4–6mm Glass H-Shape Vertical Shower Door Seal – 25mm Fin H456S2025
8–10mm Glass H-Shape Vertical Shower Door Seal – 8mm Fin H810S8
8–10mm Glass H-Shape Vertical Shower Door Seal – 15mm Fin H810S15
8–10mm Glass H-Shape Vertical Shower Door Seal – 20mm Fin H810S20
8–10mm Glass H-Shape Vertical Shower Door Seal – 25mm Fin H810S2535
H Shape Vertical Shower Door Seal – 4-6mm Glass, 3-6mm Gap HH456
H Shape Vertical Shower Door Seal – 8mm Glass, 3-8mm Gap HH08
H Shape Vertical Shower Door Seal – 10mm Glass, 3-8mm Gap HH10
F Shape Shower Door Seal 8mm Fin 4mm-6mm Glass F456S8
F Shape Shower Door Seal 12mm Fin 4mm-6mm Glass F456S12
F Shape Shower Door Seal 15mm Fin 4mm-6mm Glass F456S15
F Shape Shower Door Seal 20mm Fin 4mm-6mm Glass F456S20
F Shape Shower Door Seal 25/30/35mm Fin 4mm-6mm Glass F456S2535
F Shape Vertical Shower Door Seal for 8-10mm Glass 8mm Fin F810S8
F Shape Vertical Shower Door Seal for 8-10mm Glass 12mm Fin F810S12
F Shape Vertical Shower Door Seal for 8-10mm Glass 15mm Fin F810S15
F Shape Vertical Shower Door Seal for 8-10mm Glass 20mm Fin F810S20
F Shape Vertical Shower Door Seal for 8-10mm Glass 35mm Fin F810S2535
How to Fit a Vertical Shower Door Seal
Installing a vertical seal for shower door is straightforward and requires no specialist tools.
First, remove the old seal by gently pulling it away from the glass edge.
Clean the glass surface with warm soapy water to remove any residue or limescale deposits.
Push the new seal onto the glass edge, starting from the top and working downward, ensuring the rigid U-channel grips the glass firmly.
If the seal is longer than required, mark the desired length and trim with sharp scissors or a craft knife for a precise cut to size.
For magnetic seals, align both strips on opposing glass panels to confirm correct polarity before final fitting.
FAQ About Vertical Seals
Vertical shower door seals are usually fitted along the long side edges of shower doors or screens. They help reduce water escaping through gaps between the door and a wall, frame or another glass panel.
The product images show the end profile so you can compare the shape and dimensions with your existing seal. The vertical shower door seals in this collection are generally 2,000mm long, but always check the individual product page for the exact length before ordering.
Clean the seal with a mild detergent and a soft cloth, then rinse and wipe it dry. After each shower, we recommend wiping away any remaining water to help prevent watermarks and keep the seal clean and dry.
With manufacturing experience dating back to 1998 and access to over 9,000 seal profiles, SIMBA can help customers find replacements for a wide range of shower enclosures, including older designs. We supply directly from the manufacturer, with UK stock, product checks before dispatch and fitting advice when needed.
If you've provided accurate measurements and fitting details but we've recommended the wrong seal, we'll arrange a suitable replacement at no extra cost. If we can't provide a suitable replacement, we'll give you a full refund.
Yes. Many product images show the seal's cross-section rather than its installation direction. What matters is that the seal is suitable for your shower door and long enough for the edge you need to cover. Always check the product dimensions and fitting details before ordering.
Finding the Perfect Vertical Shower Door Seal for Your Enclosure
Water leaking through the vertical gaps of your shower is often caused by more than just a worn strip. It can also be affected by the door type, glass alignment, closing angle and the size of the gap. Whether you are dealing with a 90-degree corner joint on a quadrant enclosure or an 180-degree inline glass-to-glass overlap on a sliding door, the right vertical shower door seal should help close the gap without obstructing the door’s motion.
At SIMBA, we understand that “universal” fixes rarely suit every UK bathroom, where hard water, daily use and constant moisture can all affect shower seals over time.
As a manufacturer-direct supplier with experience since 1998, we can help match many older and current vertical shower door seal profiles, including options for framed, frameless and glass-to-glass enclosures. Our vertical shower door seals are made from clear PVC and are quality checked before dispatch for profile, finish and overall condition.
Not sure which profile you need? Read our guide: How to Identify & Fit Vertical Shower Seals, or send us a photo of your old seal for help choosing.
Built for Vertical Shower Door Gaps
Vertical seals need to handle frequent movement while maintaining a clean and consistent seal.
✔ Flexible Yet Secure
Designed to combine a firm grip with a flexible sealing edge, helping maintain contact as the door moves.
✔ Maintains Appearance Over Time
The material is designed to stay clear and resist common signs of wear, helping your shower look well-maintained.
✔ Suitable for Regular Use
Tested for repeated opening and closing, helping ensure consistent performance in everyday use.
Not sure which vertical seal fits? Send us a photo of your old seal, glass thickness and gap size — we’ll help you check the closest suitable replacement.
























































